3D Systems CubeX User Manual

Your CubeX 3D printer
Print tip replacement
So you are the owner of a CubeX and you have to replace a print tip? We have gathered information from
what you need to how to do the print tip change.
What you need:
Print tip assembly
2.5mm hex driver
Pliers
Before beginning this process please remove all filament from the print jets and check that your
print pad is level. For instructions on how to do this please refer to theCubeX user guide.
REMOVING THE DAMAGED PRINT TIP
1
Turn off the CubeX and Unplug it from the mains power.
2

3D Systems CubeX Specifications

General

Printing colors	White
Print technology	-
Printing material	ABS, Polylactic acid (PLA)
Maximum build speed	15 mm³/s
Layer thickness (max)	0.100 mm
Layer thickness (min)	- mm
Number of print heads	1
Maximum build size (WxDxH)	275 x 265 x 240 mm
Product color	Gray
Viewing window	Yes
Maximum extruder tip temperature	280 °C
Ethernet LAN	No
AC input voltage	110-240 V

Weight and Dimensions

Width	515 mm
Height	598 mm
Weight	36000 g