Need help?Do you have a question about the 3D Systems ProJet 660Pro and is the answer not in the manual?
General| Brand | 3D Systems |
|---|---|
| Model | ProJet 660Pro |
| Category | 3D Printers |
| Language | English |
Details technical specifications for ProJet 660Pro and 860Pro models.
Identifies and describes the main external and internal parts of the printers.
Procedure for cleaning the service station to prevent print head issues.
Step-by-step guide for replacing print heads on the printer.
Procedure for lubricating the fast axis bearings as prompted.
Steps for lubricating the piston screw on the 660Pro model.
Steps for lubricating the piston screw on the 860Pro model.
Procedure for lubricating the slow axis bearings when prompted.
Steps for cleaning the spreader roller for optimal surface finish.
Initial troubleshooting steps to resolve common printer issues.
Flowchart for diagnosing and resolving power-up issues.
Troubleshooting print head errors and weak part quality.
Steps to resolve issues with print head alignment failures.
Troubleshooting common error codes related to fast axis motion.
Troubleshooting common error codes related to slow axis motion.
Steps to resolve network connectivity problems with the printer.
Troubleshooting streaky, striped, or delaminated parts.
Diagnosing and fixing issues with horizontal and vertical surface finish.
Detailed explanations for various printer error codes.
To Next Page