3D Systems ProJet 660Pro - Motion Errors

To Next Page

To Previous Page

ProJet

860Pro User Manual Troubleshooting the ProJet x60Pro

5/12/13

7.5 Motion Errors - Fast Axis

There are a number of Error Codes the printer may report that all relate to the Fast Axis, and that all share

a common set of solutions.

Error Codes covered in this section:

• Error 2301:1 Motors Not Rezeroed

• Error 2303:1x Axis Pos Error

• Error 2305:1x Axis Settle

• Error 2400:1x Axis Seek Error

• Error 3011 System Error

• Error 3013 Sequencer Timeout

• Error 43000 Sequencer Timeout

For more detailed information on what these errors mean, see Section 7.13, ’Error Codes and Messages -

Background Details’.

How to do it

To perform the cleaning and lubrication called for in the flowchart, see:

• Section 3.4, ’Clean The Fast Axis Rails and Carriage’

• Section 6.6, ’Clean The Fast Axis Pulleys’

• Section 6.1, ’Fast Axis Bearing Lubrication’

3D Systems ProJet 660Pro - Motion Errors - Fast Axis