ProJet
®
x60Pro Series User Guide
iii All Rights Reserved
5/12/13
TABLE OF CONTENTS
1 ProJet x60Pro® Series Overview ............................................. 1
1.1 New Features ........................................................................................... 1
1.2 Specifications............................................................................................ 2
1.3 Computer/System Requirements.............................................................. 4
1.4 How the 3D Printing System Works.......................................................... 4
1.5 Important Terms ....................................................................................... 5
1.6 ProJet x60Pro Components...................................................................... 7
1.6.1 System Exterior ............................................................................... 7
1.6.2 Printer Interior .................................................................................. 8
1.6.3 Storage ............................................................................................. 9
1.6.4 Post-Processing Unit (PPU) Interior (ProJet 660Pro Only) ........... 10
1.6.5 Post-Processing Unit (PPU) Storage (ProJet 660Pro Only)............. 11
1.7 ProJet x60Pro Rear View ........................................................................ 12
1.8 Service Station.......................................................................................... 13
1.9 Parking Caps ............................................................................................ 14
1.10 Carriage, Print Heads, and Pogo Pins.................................................... 15
1.10.1 Front View....................................................................................... 15
1.10.2 Top Inside View .............................................................................. 16
1.11 Control Knob Operations ........................................................................ 16
1.12 LCD Menu Overview - ProJet 660Pro .................................................... 17
1.13 LCD Menu Overview - ProJet 860Pro .................................................... 17
1.14 Where To Go For More Information........................................................ 17
1.15 Contact 3D Systems............................................................................... 18
2 Setup And Print The Build ........................................................ 19
2.1 Install 3D Print .......................................................................................... 19
2.2 Open A Part In 3D Print............................................................................ 19
2.2.1 3DPrint Main Window ....................................................................... 19
2.2.2 Part Orientation, Strength, and Printing Speed ................................ 19
2.3 Check The Default Settings...................................................................... 20
2.3.1 Printer Settings ................................................................................. 20
2.4 Check The Build Settings ......................................................................... 20
2.5 Prepare the Build Area ............................................................................. 20
2.6 Print the Build ........................................................................................... 21
2.7 Dry The Part ............................................................................................. 22
2.8 Clean the Part........................................................................................... 22
2.9 Coarse Cleaning....................................................................................... 22
2.9.1 Manual Coarse Cleaning .................................................................. 22
2.10 Fine Cleaning.......................................................................................... 23
2.10.1 Fine Cleaning Using the Post-Processing Unit (660Pro Only) ....... 23
2.10.2 Fine Cleaning Using the Core Recycling Station............................ 23
2.10.3 Moving Parts By Hand.................................................................... 23
2.10.4 Moving Parts Using the Part Cart ................................................... 23
2.10.5 Fine Cleaning in the CRS ............................................................... 24
2.11 Next Step: Cleaning the Printer .............................................................. 25
To Next Page
Loading...
