Need help?Do you have a question about the 3D Systems CUBE and is the answer not in the manual?
General| Print technology | Plastic Jet Printing (PJP) |
|---|---|
| Printing material | ABS, Polylactic acid (PLA) |
| Number of printing colors | 16 |
| Maximum build size (WxDxH) | - mm |
| Plug and Play | Yes |
| USB version | 2.0 |
| Ethernet LAN | No |
| Card reader integrated | - |
| Product color | Silver |
Explanation of hazard warning symbols and their meanings.
Essential rules and precautions for safe printer operation.
Step-by-step guide for initial printer setup and installation.
Process for ensuring print bed levelness for quality prints.
Fine-tuning printer settings for optimal print quality.
Detailed steps for initiating and managing print jobs.
Steps for safely detaching finished prints.
Configuring various parameters for the print job.
Instructions for printing models wirelessly.
Printing models using a mobile device application.
Saving models to USB storage via the desktop application.
Instructions for applying adhesive to the print pad.
Step-by-step guide for changing print material cartridges.
Guide to establishing network connectivity for the printer.
Manually setting the gap between nozzle and print pad.
Fine-tuning the printer for optimal print output.
To Next Page
