3D Systems CUBE User Manual

83D Systems, Inc.
6
UNPACKING AND SETTING UP YOUR CUBE
CONTENTS
*Depending on the Cube model and conguration, up to two cartridges may be included. Not every printer will be packaged with two
cartridges.
NOTE: The sandpaper should only be used for lightly sanding the print pad when prompted by the touchscreen
display. It should not be used for sanding parts. For more information, refer to the section titled Print Pad
Maintenance.
NOTE: The actual appearance of the contents may differ from the illustrations.
UNPACKING AND INSTALLING YOUR CUBE
NOTE: Keep all packing materials for future transport. Transporting a printer that is not packaged properly may
damage the printer and void the manufacturer’s warranty.
1. Pull the clips (A) and remove them from the top of the printer box.
Sandpaper
A
Power Supply Power Cord Quick Start Guide
Removable
Print Pad
Cartridges*Cube Cube Glue
Casing and Contents
Scraper
Pliers
cubify.com
USB Mass Storage
Device
1.5 mm Allen
Wrench
Gap Gauge Sandpaper
Casing

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver