3D Systems CUBE User Manual

1053D Systems, Inc.
RECOVERING THE CARTRIDGE
Purge Jets is a utility that allows you the recover a print cartridge. The cartridge must be properly installed in the printer before
performing this procedure.
NOTE: If you do not have the door on your cartridge and need to recover it, please contact Cubify Support.
1. Carefully open the cartridge door and remove it from the cartridge.
2. Select SETUP.
3. Navigate to the Print Jet Calibration screen and select PURGE JETS.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver