3D Systems CUBE User Manual

543D Systems, Inc.
Printer
The PRINTER utility (F) enables you to nd and connect to your printer on your wireless network.
A
Available Printers Select a printer on your wireless network.
B
Ofine Cube
Select Ofine Cube if you intend to use a printer that is not
connected to your network.
C
Ofine EKOCYCLE Cube
Select Ofine EKOCYCLE Cube if you intend to use an
EKOCYCLE Cube printer that is not connected to your network.
D
Find Cubes on Network Refresh the list of printers on your network.
E
Add Cube Manually
Manually add a printer to your network by entering an IP
address.
A
B
C
D
E
F

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver