3D Systems CUBE User Manual

693D Systems, Inc.
Sidewalks
Sidewalks (A) are mesh boundaries that print around the outside diameter of a part. Its main purpose is to reduce the tendency of
warping especially when printing at parts with ABS material. They should not be used for parts that have ne details.
Supports
Supports are used when printing creations that need a supporting structure to print properly. These parts may have overhangs, cavities
or other openings that will not print correctly without a supporting structure.
A

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver