3D Systems CUBE User Manual

1083D Systems, Inc.
UPDATING THE CUBE FIRMWARE
The printer rmware can either be updated via wireless connection or by using a USB mass storage device.
NOTE: Whenever a rmware update is performed, you must perform the Auto Level and Auto Gap procedures.
Updating Firmware Using Wi-Fi
1. Select SETUP.
2. Navigate to the System 3 screen and select FIRMWARE.
3. Select WIFI.
NOTE: The printer will attempt to connect to the server.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver