3D Systems CUBE User Manual

1073D Systems, Inc.
4. Insert the top of the cartridge door into the cartridge and then secure it in the
closed position.
NOTE: As the print material is fed into the print jet, the sleeve will
move back into position.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver