3D Systems CUBE User Manual

1153D Systems, Inc.
4. Place the upper foam support on top of the printer.
5. Close the box and install the clips in the cutouts on top of the box.
6. Place the printer box into the outer box and seal the outer box.
CONTACTING SUPPORT
Support for the Cube is available at cubifysupport@cubify.com.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver