773D Systems, Inc.
SAVING A MODEL TO A MASS STORAGE DEVICE
Desktop Application
For printers not connected to a wireless network, you can save Cubify models to a USB mass storage device and then transfer the print
les by inserting the device into the USB port on the printer.
Pan/Zoom: Rotate the mouse wheel in either direction
Move the Stage: Press and hold the mouse wheel and drag the mouse
Rotate the Stage: Right-click and drag the mouse to rotate the stage
1. Select an item from My Shelf and select Print Now.
2. Select a color wheel to set a color for your model.
3. Select a color and then select Set to continue.
NOTE: For a list of available colors and material types,
please visit www.cubify.com.
4. Color, scale and position the model on the print pad.
To Next Page
Loading...
