3D Systems CUBE User Manual

1113D Systems, Inc.
Updating Firmware Using USB
When using a USB mass storage device to update the rmware, log in to your www.cubify.com account and download the latest
rmware for your USB mass storage device.
1. Select SETUP.
2. Navigate to the System 3 screen and select FIRMWARE.
3. Select USB KEY.
4. Insert the USB mass storage device into the printer and select the checkmark to
continue.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver