3D Systems CUBE - Connecting Cubify to Your Printer

563D Systems, Inc.
Connecting Cubify To Your Printer
Your printer must be connected to the same wireless network as your computer or mobile device to transfer print les wirelessly or to
view the printer properties.
1. Select PRINTER (A).
2. Select the printer on your network (B).
If you would rather print from a non-network printer, select Ofine Cube (C).
NOTE: If your printer is not listed, select Refresh (D) and then select your printer from the list. You can also
manually connect to the printer by entering its IP address and selecting ADD (E).
B
C
D
E
A