3D Systems CUBE User Manual

483D Systems, Inc.
PRINT TAB
*Not an available feature for mobile applications.
A
ADD
Add a creation to the print pad from
MY SHELF or from a le location.
B
REMOVE
Select and remove a creation from
the print pad.
C
UNDO* Undo your last action
D
REDO* Redo your last action
E
MOVE* Move the model on the print pad
F
ROTATE* Rotate the model on the print pad
G
SCALE* Scale the model
H
CENTER* Center the model on the print pad
I
RESET* Reset
J
PRINT
SETTINGS
Change the print settings
K
IN* Zoom in on a model
L
OUT* Zoom out on a model
M
VIEW Change the view of the model
N
PRINTER
Locate and connect to your printer
on your wireless network.
O
Printer Name
The name of the printer connected
to your network. The printer
is considered ofine if it is not
connected to a wireless network.
P
Help
Find help for navigating the print tab
in the application.
Q
Cartridges
Change the cartridge colors and
material type of a non-networked
printer
R
Print Pad
A representation of the printer’s
print pad
S
SUPPORTS
Turn on or turn off supports for your
print le.
T
SIDEWALKS
Turn on or turn off sidewalks in your
print le.
U
PRINT
Transfer the print le to the printer
using the wireless connection to
your network.
O
QQ
R
U
P
A B C D E F G H I J K L M N
T
S

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver