3D Systems CUBE User Manual

783D Systems, Inc.
4. Select File.
NOTE: Selecting My Shelf will save the print le to My Shelf.
The original 3D le will remain there as well.
NOTE: Cubify will generate a print le.
5. Once the le has been generated, browse to the USB mass storage
device and select Save.
6. Select OK.
7. Refer to the section titled Printing Your Creation for information about
printing from a USB mass storage device.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver