3D Systems CUBE User Manual

1093D Systems, Inc.
NOTE: If the printer can not connect to the server, select RETRY to
connect to the server. Select CANCEL if you do not want to update
the rmware.
NOTE: The printer will check for a rmware update.
NOTE: The printer will begin downloading new rmware. The blue
bar is a progress indicator.
NOTE: The download could take a few minutes.
WARNING: DO NOT POWER OFF OR DISCONNECT THE PRINTER
FROM UTILITY POWER DURING THE UPDATE PROCESS.
NOTE: If no new rmware is available, select the checkmark to
continue.
NOTE: If the rmware download fails, select RETRY to start the
download again. Select CANCEL if you do not want to update the
rmware.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver