3D Systems CUBE User Manual

883D Systems, Inc.
4. Pull the jet wiper (A) upward.
5. Install the new jet wiper onto the purge bin and reinstall the purge bin assembly
into the printer.
NOTE: Ensure the jet wiper is fully seated before reinstalling the
purge bin assembly.
6. Select the checkmark to conrm the replacement of the jet wiper.
A

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver