3D Systems CubePro 3D Printer - Advanced Build Settings; Print Pattern Fill; Shell Options

ADVANCED BUILD SETTINGS
The Advanced Build Settings utility allows you to customize the layer thickness of the Print Pattern Fill,
Shell Options and Sidewalk Options as well as enabling or disabling Support Borders or Draw Fine Features.
Print Pattern Fill
Fill Spacing is the amount of space between interior supports. Lower values increase the interior strength
of the creation.
Shell Options
Top Surface Layers Increase the value for a thicker top surface layer.
Bottom Surface Layers Increase the value for a thicker bottom surface layer.
Outer Walls Increase the value for increased strength of the outer walls.