BUILD SETTINGS
Build Settings
Print Mode
The software has four modes including 3 set
modes and one custom mode.
Raft and Support
Selection of the types of materials used
to create rafts, supports and sidewalks.
Layer Resolution The detail and smoothness of a part. Advanced
Adjustments to print pattern fill and the
creation shell.
Print Strength The strength of the inner structure of a creation. Help Opens the help menu.
Print Pattern The design of the inner structure of a creation.
Descriptions
Print Mode
Standard
• Layer Resolution: 200um
• Print Strength: Strong
• Print Pattern: Diamonds
Premium
• Layer Resolution: 70um
• Print Strength: Strong
• Print Pattern: Diamonds
Draft
• Layer Resolution: 300um
• Print Strength: Strong
• Print Pattern: Lines
Custom Custom allows the user to customize their print settings
Print Resolution
0.070
• Great mode for parts requiring smooth surfaces
• Layer lines are not very visible in these parts
• Good mode for artistic parts with a smooth flow
• Not the best mode for fine detail
0.200
• Best mode for general printing and most compatible mode for a wide range of geometries
• Fine detail preservation for things like steeples, spires, sharp points, or thin walls
0.300
• A fast mode with thicker layers
• Good for large parts with minimal detail
Print Strength
Hollow
• Fastest mode to produce a part
• Hollow has fewer outer surfaces and larger print pattern spacing
• Best for parts that will not be stressed
Strong
• Medium amount of outer surfaces and smaller print pattern spacing
• Best for parts that will have minimal physical abuse
Almost Solid
• The most surfaces and the tightest print pattern spacing
• The most robust part
• Best for parts that will be stressed
To Next Page
Loading...
