Movement
Geometry Value
Fields
Enter the appropriate values to move the model. Scale
Scale the model by the specified
percentage.
Move X Button
Once a value has been entered, select the button to
move the model left or right.
Revert
Undo the scaling and revert back to the
original size.
Move Y Button
Once a value has been entered, select the button to
move the model forward or backward.
Rotate
Geometry
Value fields
Enter values to rotate the model
Auto Place Auto Place the model to the center of the print area. X
Rotate the model front-to-back on the X axis
by the specified value.
Move Model
Once this button has been selected, left click on the
model and drag it into position.
Y
Rotate the model left and right on the Y axis
by the specified value.
Scale Value Field Enter the scale percentage Z
Rotate the model up and down on the Z axis
by the specified value.
- to mm
Scale the 3D model to the millimeter value entered
in the field.
Revert
Undo the applied rotation and revert to the
original position.
+ to Inch
Scale the 3D model to the inch value entered in the
field.
Color, Build, Print File And Help
Material 1 ColorSelect shells to be rendered by print jet 1 Close Close a print file
Material 2 ColorSelect shells to be rendered by print jet 2 Save Print File Save a build print file
Material 3 ColorSelect shells to be rendered by print jet 3 Send
Send a print job through the wireless network to a
connected printer
Build Button Process the 3D model to obtain a print file Help Help menu
Open Open a print file
To Next Page
Loading...
Need help?
General
