To Next Page

To Previous Page

NOTE: Wait until the update has been completed.

WARNING: DO NOT POWER OFF OR DISCONNECT THE PRINTER FROM UTILITY POWER

DURING THE UPDATE PROCESS.

Press and release the touchscreen display ON/OFF button and the display will restart.5.

Updating Firmware Using WI-FI

To update the ﬁrmware using the wireless utility, the printer must be connected to a wireless network.

Select SETUP.1.

Navigate to the Advanced screen and select FIRMWARE.2.

Select WIFI.3.

Limitation of Liability5
Safety Symbols and Definitions6
Safety Guidelines6
Important Safety Information6
Features and Benefits7
Cubepro 3D Printer Properties7
Print Materials7
Dimensions and Weight10
Electrical Requirements10
Material Storage10
Specifications and Requirements10
Unpacking and Setting up Your Cubepro11
Unpacking and Initial Setup12
Setup and Activation17
Connecting Via Usb Cable23
Menu Overview24
Printing Your Creation27
Printing Procedure27
Removing Your Creation from the Print Pad32
Finishing Your Creation32
Removing Supports - Optional Ultrasonic Support Removal Tank33
Caustic Soda Method34
Cubepro Software36
Installing Windows Software36
Installing MAC Software36
Software Overview38
CAD File Functions39
Geometry Functions39
Color, Build, Print File and Help40
View Tab41
Zoom and View41
Settings Tab42
Printer Configuration43
Build Settings44
Firmware Update49
Printer Connection50
Preparing and Printing a Creation54
Operation Procedures58
Applying Cube Glue58
Installing a Material Cartridge62
Replacing a Material Cartridge65
Setting up an Ad Hoc Network77
Maintenance79
General Cleaning79
Cleaning the Jet Wiper79
Restoring Roughness to the Print Pad80
Calibrating the Print Pad83
Calibrating the Z-Gap and Print Pad Level86
Level Gap Calibration Print Overview86
Printing the Level Gap Calibration File86
Reading the Print Pad Level Calibration Print89
Calibrating the Offset Jets91
Calibration Overview91
Calibrating the Wipe Function95
Testing the Print Jets and Extruders96
Moving the Print Jets98
Updating the Printer Firmware101
Updating Firmware Using WI-FI102
Replacing Fuses105
Lubricating the Bearing Rods107
Error Codes108
Troubleshooting109
Temperature Errors109

Brand	3D Systems
Model	CubePro 3D Printer
Category	3D Printers
Language	English

3D Systems CubePro 3D Printer User Manual

Table of Contents

Questions and Answers:

3D Systems CubePro 3D Printer Specifications

Related product manuals