3D Systems, Inc.
1
INTRODUCTION TO THE PROJET 2500
The ProJet 2500 3D printer system is a Multi-Jet Printer (MJP) printer. The
solid imaging 3D printer produces plastic prototype parts from 3D solid
Computer-Aided Design (CAD) models and through the 3D printer system
client software. The parts are generated in a rapid prototype (RP)
environment. The primary features of the printer are the user interface, build
chamber including the print engine, material delivery module, and the
material delivery drawer. The back of the printer houses the power switch,
ethernet and the power cord connections.
2
IMPORTANT SAFETY INFORMATION
SAFETY SYMBOLS AND DEFINITIONS
UV RADIATION HAZARD: Invisible UV radiation is accessible in the vicinity of this sign or behind the panel. Radiation
can cause eye injury or blindness, burn injury and/or re. Access panels are for service only and should be opened
only by certied service personnel.
ELECTRICAL SHOCK HAZARD: High voltage electricity is accessible in the vicinity of this sign or behind the access
panel. High voltage can cause severe burns or death, as well as res. Access panels are for service only and should
be opened only by certied service personnel or trained maintenance personnel.
HOT SURFACE HAZARD: A hot surface is accessible in the vicinity of this sign or behind the access panel. Avoid
contact. Hot surfaces can cause burn injury or re. Allow surface to cool before touching. Access panels are for
service only and should be opened only by certied service personnel or trained maintenance personnel.
HARMFUL IRRITANT WARNING: Indicates that skin or eye irritation could result while exposed to a chemical
composition
.
CAUTION: Indicates the possibility of loss of data or damage to equipment.
WARNING: INDICATES THE POSSIBILITY OF INJURY OR DEATH TO PERSONNEL.
WEAR GLOVES: Wear the appropriate gloves when required. For example, when touching surfaces that may contain
or have been exposed to materials, wear nitrile gloves. Heat gloves are necessary when touching surfaces that may
be hot to ensure burns don’t occur.
ULTRAVIOLET RADIATION INSIDE: Exposure may cause eye damage. Do not operate without covers. Wear UV eye
protection.
NOTE: A note signies important information but not information of a critical content.
1
To Next Page
Loading...
Need help?
General
