3D Systems ProJet 2500 - Customer Support; Customer Support Hotline

3D Systems, Inc.
GENERAL
ProJet 2500 service procedures must be performed only by a 3D Systems-certied service technician unless this guide explicitly
states otherwise. If your 3D printer system needs service, contact 3D Systems Technical Support at the following numbers:
• In the United States or Canada, call 800-793-3669
• In Europe, call +49-6151-357357
You can also contact your local 3D Systems representative.
3D Systems’ support portal is located at http://www.3dsystems.com/support
For material safety data sheet, go to http://www.3dsystems.com/support/materials/msds
41