To Next PageTo Next Page
Need help?Do you have a question about the 3M 6000 Series and is the answer not in the manual?
General| Sizes Available | Small, Medium, Large |
|---|---|
| Standards/Approvals | NIOSH approved |
| Material | Thermoplastic Elastomer |
| Cartridge or Filter Type | Bayonet |
| NIOSH Cartridge or Filter Assigned Color Coding | Varies by cartridge/filter type |
| Compatible Filters | 3M 2000, 2200, 7000, 5000 Series |
| Applications | Chemical handling, painting, construction, manufacturing |
| Product Type | Reusable Half Facepiece Respirator |
Defines the purpose and approved use of 3M 6000 Series Half Facepiece Respirators.
Outlines applications for respiratory protection based on approvals and regulations.
Specifies conditions and concentrations where the respirator should not be used.
Provides step-by-step instructions for safe and effective respirator use.
Details specific limitations, such as oxygen levels and concentration limits.
Highlights specific instructions for critical applications, e.g., mercury vapor cartridges.
Details various 3M Half Facepieces and Probed Respirator Assemblies.
Lists available accessories and replacement parts for respirators.
Details the process for assembling 6000 Series cartridges onto the facepiece.
Guides on assembling filters with retainers, adapters, or directly to the facepiece.
Instructions for attaching dual airline breathing tubes to the facepiece.
Step-by-step guide on how to put on the respirator correctly.
Explains how to perform positive and negative pressure seal checks before use.
Details methods and procedures for quantitative and qualitative fit testing.
Step-by-step guide for inspecting the respirator before each use.
Provides instructions for cleaning and storing the respirator after use.
Instructions for removing and installing inhalation and exhalation valves.
Instructions for replacing inhalation gaskets and the respirator strap assembly.
