20
Section 14.
Section 15.
Additional Wrist Strap
Monitoring Information
Suggested reading on wrist strap
requirements and wrist strap
monitoring:
• EIA 625 - Requirements for
Handling Electrostatic-Discharge-
Sensitive (ESDS) Devices.
• EN100015/1 - Protection of
Electrostatic Sensitive Devices.
• 3M Tech. Response #123 - Pulsed
Current vs. Constant Current in
Work Station Monitors.
• 3M Static Digest Issue No.1, 1998 -
Disc Drive Industry - Static Control
Considerations.
Note:
The 3M references are available by
calling 3M Electronic Handling &
Protection Division Customer Service
Department at 1-800-328-1368.
Industry standards (EIA & EN) are
available through Global Engineering
Documents at 1-800-854-7179.
Required Accessories and Optional Available Parts
Model No. Description Size
2361 Dual Conductor Fabric Wrist Strap* small
2362 Dual Conductor Fabric Wrist Strap* medium
2363 Dual Conductor Fabric Wrist Strap* large
2364 Dual Conductor Fabric Wrist Band small
2365 Dual Conductor Fabric Wrist Band medium
2366 Dual Conductor Fabric Wrist Band large
2368 Dual Conductor Fabric Wrist Band adjustable
2381 Dual Conductor Metal Wrist Strap* small
2382 Dual Conductor Metal Wrist Strap* medium
2383 Dual Conductor Metal Wrist Strap* large
2384 Dual Conductor Metal Wrist Band small
2385 Dual Conductor Metal Wrist Band medium
2386 Dual Conductor Metal Wrist Band large
2360 Dual Conductor Coil Cord 5 ft. (1,5 m.)
2370 Dual Conductor Coil Cord 10 ft. (3,0 m.)
2371 Dual Conductor Coil Cord 20 ft. (6,0 m.)
2380 Monitor-Table Mat Replacement Cord (No resistor) 6 ft. (1,8 m.)
2389 Monitor-Table Mat Replacement Cord (No resistor) 10 ft. (3,0 m.)
3057 Stand-By Jack 1.9 x 1.3 x 1.1 in. (4,8 x 3,3 x 2,8 cm)
732 Replacement Remote Input Jack 6.5 x 3.1 x 1.4 in. (16,5 x 7,9 x 3,5 cm)
733 Dual Remote Splitter Kit 6.5 x 3.1 x 1.4 in. (16,5 x 7,9 x 3,5 cm)
* Includes band & cord
To Next Page
Loading...
