3M 7500 Series User Manual

Remove filter cartridges. Wipe
plastic with 910 saturated
Wipe-all.
3
DO NOT spray cleaner
inside the cartridge.
DO NOT use compressed
air to clean cartridge.
Clean FACEPIECE ONLY (not
filters) by immersing in first
bucket of warm 910 solution,
rubbing with Wipe-all.
4
Disinfect by submerging in
second bucket of warm 910
solution for 60 seconds.
Allow 910 cleaner to stay on
mask for 9 minutes before
rinsing with water.
5

3M 7500 Series Specifications

General

Product Type	Half Facepiece Respirator
Series	7500 Series
Material	Silicone
Size Options	Small, Medium, Large
Connection Type	Bayonet
Exhalation Valve	Yes
NIOSH Approval	Yes
Adjustable Straps	Yes
Filter Compatibility	3M Filters and Cartridges
Weight	Varies by size
Use	Industrial