3M 7500 Series User Manual

7500 SERIES RESPIRATOR INSTRUCTIONS
Cleaning Procedure
Respirators must be thoroughly cleaned after being contaminated and
at the end of each shift. When a full cleaning is not possible Sani-Hands
wipes may be used to wipe the outside of the mask to perform partial
cleaning. Do not wipe the inside of the mask with the same wipe used
to wipe the outside.
Use the following supplies
from your station inventory:
• 2 Red Buckets (cleaned)
• Waxie 910 solution
• Wipe-all towels
• Nitrile Gloves
1
Fill two buckets with warm
Waxie 910 cleaner using the
mop bucket filler.
not to exceed 120º F
2

3M 7500 Series Specifications

General

Product Type	Half Facepiece Respirator
Series	7500 Series
Material	Silicone
Size Options	Small, Medium, Large
Connection Type	Bayonet
Exhalation Valve	Yes
NIOSH Approval	Yes
Adjustable Straps	Yes
Filter Compatibility	3M Filters and Cartridges
Weight	Varies by size
Use	Industrial