ENGLISH
Go to
Main Menu
Go to Operator Guide
Table of Contents
3M 9700 Operator’s Guide
4
Product Description and Machine Characteristics
The 3MtOverhead Projector 9700 is designed to be
safe, efficient, portable, and easy to use. It features an
open head, triplet lens, high output lamp, lamp
changer, lamp brightness control, external colour tuning
adjustment, unswitched power outlets for accessories,
and lamp interrupt switches to prevent damage.
To
transport the 9700 projector
, lower the post, retract the
folding
legs, rotate the head, slip the hard travel cover over
the body and lift by the carrying handle.
Refer to the illustration below to identify the external
machine characteristics for the 9700.
Part Identification List
1. Open Projection Head
2. Projection Mirror
3. Mirror Lift Tab
4. Triplet Lens
5. Flip-In Magnifier (Optional Accessory)
6. Head Release Button
7. Focus Knob
8. Folding Post
9. Post Latch
10. Post Cradle
11. Accessory Outlets (design varies by country)
12. Stage Glass
13. On/Off Power Switch
14. Attached Power Cord (120 VAC only)
15. Detachable Power Cord Connector (if equipped)
16. Control Panel Door (with lamp interrupt switch)
a. Lamp Changer Dial
b. High/Low Lamp Brightness Switch
17. Stage Cover Release Latch (with interlock)
18. Stage Cover
19. Folding Carrying Handle
20. Folding Leg Release Latch (left, right sides)
21. Folding Legs
22. Vibration Isolation Feet
23. Folding Mirror Pan (with lamp interrupt switch)
24. Travel Feet
25. Machine Identification Plate
26. Colour Tuning Adjustment
27. Hard Travel Cover
To Next Page
Loading...
