To Next PageTo Next Page
Need help?Do you have a question about the 3M 9080 and is the answer not in the manual?
Lists the 3M 9000 Series Overhead Projector models covered in this breakdown.
Lists the original issue date and subsequent revision dates of the manual.
Details specific changes and additions made during Revision G/H, starting on page 3.
Continues the documentation of changes made during Revision G/H, starting on page 4.
Provides further details on changes implemented in Revision G/H, starting on page 5.
Explains the content and purpose of the Illustrated Parts Breakdown manual.
Provides guidance on how to identify and locate specific parts within the manual.
Details the process for ordering parts and provides necessary contact information.
A visual guide showing the main sections and assemblies of the projector.
Lists the individual components and part numbers for the wide angle head assembly.
Lists the components and part numbers for the articulate (closed) head assemblies.
Lists the components and part numbers for triplet and varifocal head assemblies.
Details the parts that make up the projector's arm and focus mechanism.
Lists the various parts and components that constitute the projector's top cover.
Details specific parts like power buttons, actuators, and heat shields for the top cover.
Lists the fixed and folding posts used in the base enclosure assembly.
Details the power cords and various labels affixed to the base enclosure.
Lists resistors, switches, and related components found within the base enclosure.
Details the fan motor, fuses, and related mounting hardware.
Lists reflective tape, caution labels, and service labels for the cooling fan.
Lists the individual parts for the ENX single lamp housing assembly.
Lists the components and part numbers for the ENX/FXL dual lamp housing.
Parts list for the EVD dual lamp housing (9550), Mfg Code A3 and earlier.
Parts list for the EVD dual lamp housing (9550), Mfg Code A3 and later.
Lists the individual parts for the FNT single lamp housing assembly.
Parts list for the FNT dual lamp housing, Mfg Code A3 and earlier.
Parts list for the FNT dual lamp housing, Mfg Code A3 and later.
Lists parts for the lamp changer and hi/lo control module (dual lamp versions).
Details levers, switches, and PCBs for the lamp changer and hi/lo control module.
Lists the components and part numbers for the roller assembly kit.
Wiring diagram for 9080, 9100, and 9200 FNT models.
Wiring diagram for 9050, 9060, 9070, 9080, 9100, and 9200 models.
Wiring diagram for 9400/9550 models without a lamp changer PCB.
Wiring diagram for dual voltage models.
Detailed list of wire jumpers, their lengths, and colors.
Technical specifications for projector models in Australia and Brazil.
Technical specifications for projector models in Hong Kong, India, and Japan.
Technical specifications for projector models in New Zealand, Philippines, and Saudi Arabia.
Technical specifications for projector models in Switzerland, Taiwan, and Thailand.
Technical specifications for projector models in UK, US, and Canada.
Disclaimer regarding product use, accuracy, and liability associated with its application.
General
