12 3M™ Dual-Touch Chassis Displays User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-42846A
C1910PS
Attaching the L-Brackets
Depending on your mounting scheme, you may use the L-brackets to mount your
displays onto your wall or device. Find a suitable location for attaching L-brackets.
Note: You will need a screwdriver to attach the L-brackets. Your touch monitor includes
two L-brackets (and four screws, M4x6). This equipment is intended to be mounted in
accordance with the proper hardware and the installation instructions supplied with the
product. Use of mounting brackets or screws other than those specified in the installation
instructions may cause a hazard.
Top and bottom mounting brackets Left and right mounting brackets
To Next Page
Loading...
Need help?
General
