18 3M™ Dual-Touch Chassis Displays User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-42846A
Using Windows® XP Embedded
Express:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Be sure that your Enhanced Write Filter (Windows XP Embedded) is disabled. If
your EWF is enabled, please disable it using the EWF Manager command.
4. Once the EWF is disabled, click on the XP driver on the CD-ROM and follow the
step-by-step instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the folder file on the CD-ROM.
Using Windows® CE
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Using Platform Builder, build an image file by following the step-by-step instructions
found in the folder file on the CD-ROM.
Using Linux or Apple® Mac OS
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the folder file on the CD-ROM.
To Next Page
Loading...
Need help?
General
