3M DBI Sala EXOFIT User Manual

© 3M 2020
1
EZ
QC
LQC
TB
B
Models
1 2 3 4
Arc Flash Crossover XS SM MED LG XL 2XL Suspension Seat EZ Link Belt & Hip Pad Sternal Shoulder Hip Chest Belt Leg Adjuster
PT
TA
Size Attachment Elements Buckles
A
B
C
1140156C
A
EX Plus
Constr.
Climbing
√
√ PT TB LQC REV
1140157C √ √ PT TB LQC REV
1140158C √ √ PT TB LQC REV
1140159C √ √ PT TB LQC REV
1140160C √ √ PT TB LQC REV
1140161C √ √ PT TB LQC REV
1140162C √ √ PT TB LQC REV
1140163C √ √ PT TB LQC REV
1140164C √ √
1140165C √ √
1140166C √ √
1140167C √ √
1113699C
B
EX
Rescue
√ √ LQC LQC
1113700C √ √ LQC LQC
1113701C √ √ LQC LQC
1113566C √ √ √ LQC LQC
1113573C √ √ √ LQC LQC
1113578C √ √ √ LQC LQC
1113345C √ √ LQC LQC
1113346C √ √ LQC LQC
1113347C √ √ LQC LQC
1113348C √ √ LQC LQC
1113370C √ √ LQC LQC
1113371C √ √ LQC LQC
1113372C √ √ LQC LQC
1113373C √ √ LQC LQC
1113454
C
EX Plus
Constr.
Tower
Climb
√ √ LQC TB LQC REV
1113455 √ √ LQC TB LQC REV
1113456 √ √ LQC TB LQC REV
1113457 √ √ LQC TB LQC REV
1113458 √ √ LQC TB LQC REV
1140168C √ √ LQC TB LQC REV
1140169C √ √ LQC TB LQC REV
1140170C √ √ LQC TB LQC REV
1140171C √ √ LQC TB LQC REV
1140172C √ √ LQC TB LQC REV
1140173C √ √ LQC TB LQC REV
1113190C √ √ LQC TB LQC REV
1113191C √ √ LQC TB LQC REV
1113192C √ √ LQC TB LQC REV
1113193C √ √ LQC TB LQC REV
1113194C √ √ LQC TB LQC REV
USER INSTRUCTIONS



CSA Z259.10
 Harness meets the test requirements of the ASTM F887-11 standard and is designed for use in environments where an arc ash (electrical explosion) could occur.
1
2
3
4
2
3
4
1
3
2

3M DBI Sala EXOFIT Specifications

General

Brand	3M
Model	DBI Sala EXOFIT
Category	Safety Equipment
Language	English

Summary

1.0 APPLICATIONS

1.1 PURPOSE

Defines the intended use of full body harnesses as components of personal fall protection systems for preventing or arresting falls.

1.4 LIMITATIONS

Outlines critical application limitations including capacity, free fall, fall clearance, swing falls, and environmental hazards.

2.0 SYSTEM USE

2.2 INSPECTION FREQUENCY

Details user and competent person inspection intervals, and mentions inspection logs and RFID systems.

2.5 MAKING CONNECTIONS

Provides guidelines for making secure connections using self-locking snap hooks and carabiners to prevent roll-out.

2.7 LANYARD PARKING ATTACHMENT

Explains the purpose of lanyard parking attachments and proper securing of free hanging lanyard legs.

3.0 HARNESS USE

3.1 BEFORE EACH USE

Instructs users to verify the work area, PFAS, and perform pre-use harness inspection as per the log.

3.6 DONNING AND FITTING THE EXOFIT NEX FULL BODY HARNESS

Guides users on how to properly put on and fit the ExoFit NEX Full Body Harness, including strap adjustments.

3.7 USE OF FALL ARREST D-RING OR ATTACHMENT ELEMENT

3.8 MAKING CONNECTIONS

Provides guidelines on preventing roll-out during connections, emphasizing self-locking connectors and proper fit.

3.10 SUSPENSION TRAUMA STRAP

Explains the use of Suspension Trauma Straps to alleviate pressure during suspension after a fall.

4.0 INSPECTION

4.4 DEFECTS

Instructs to remove from service and mark as 'DO NOT USE' any harness showing defects or doubts about safe condition.

5.0 MAINTENANCE, SERVICING, STORAGE

5.1 CLEANING INSTRUCTIONS

Provides instructions for cleaning the harness and pads, including detergent type, water temperature, and drying methods.

5.2 AUTHORIZED SERVICE

States that maintenance and servicing must be done by a factory authorized service center and requires written authorization.

6.0 LABELING

GLOBAL PRODUCT WARRANTY, LIMITED REMEDY AND LIMITATION OF LIABILITY

WARRANTY

States the warranty against factory defects in workmanship and materials for one year from installation or first use.

LIMITED REMEDY

Outlines 3M's commitment to repair or replace products with factory defects, excluding damage from wear, abuse, or misuse.

LIMITATION OF LIABILITY

Specifies that 3M is not liable for indirect, incidental, or consequential damages related to the products.