To Next PageTo Next Page
Need help?Do you have a question about the 3M DBI-SALA XE Series and is the answer not in the manual?
General| Adjustable Leg Straps | Yes |
|---|---|
| Back D-Ring | Yes |
| Brand | 3M |
| Product Series | DBI-SALA XE Series |
| Category | Safety Equipment |
| Material | Polyester |
| Standards Compliance | ANSI Z359.11, CSA Z259.10 |
| Color Options | Multiple options available |
Defines the product's purpose and approved applications for fall protection systems.
Provides critical warnings about misuse, emphasizing risks of serious injury or death.
Describes how the harness can be used in various fall protection system applications.
Explains how to determine the correct harness size based on product labels.
Specifies the maximum weight capacity for the full body harness.
Covers product purpose, standards, training needs, and rescue plan requirements.
Details capacity, subsystem compatibility, environmental hazards, and connector compatibility.
Warns against extended suspension and recommends seat support to prevent trauma.
Details how to make appropriate and inappropriate connections with connectors to ensure safety.
Explains the proper use of lanyard parking attachments and the risks of free-hanging lanyard legs.
Covers planning, anchorage, sharp edges, and connecting subsystems for installation.
Details fastening buckles, adjusting straps, and donning/fitting the harness.
Details installation for straight-pin and carabiner harness interfaces for SRDs.
Details how to deploy and use suspension trauma straps to alleviate suspension trauma after a fall.
Explains how to secure lanyards with loop ends by choking onto a web loop for a compatible connection.
Guides the user on connecting to their Fall Protection System after donning the harness.
Checks before use, safe connection practices, and actions for unsafe conditions.
Covers inspection frequency, procedures, defects, and product lifespan.
Provides instructions for cleaning, service limitations, and proper storage.
Illustrates product labels, their meaning, location, and compliance information.
Describes RFID tag location for inspection and provides disposal instructions.
Lists and defines key terms used throughout the user instructions for clarity.
Outlines warranty terms, conditions, period, and the process for repair or replacement claims.
States the extent of 3M's liability for indirect, incidental, or consequential damages.
