To Next PageTo Next Page
Need help?Do you have a question about the 3M DBI SALA EXOFIT X300 Series and is the answer not in the manual?
General| Product Type | Full Body Harness |
|---|---|
| Series | ExoFit X300 |
| D-Ring Material | Steel |
| Leg Straps | Yes |
| Adjustable Leg Straps | Yes |
| Adjustable Shoulder Straps | Yes |
| Padding | Yes |
| Back Pad | Yes |
| Tool Attachment Points | Yes |
| Brand | 3M DBI-SALA |
| Material | Polyester |
| D-Rings | Front |
| Standards | ANSI Z359.11, CSA Z259.10 |
| Weight Capacity | 420 lbs (190 kg) |
Defines the product's intended application and user type.
Outlines critical risks associated with using a full body harness and how to mitigate them.
Details risks related to working at height and using fall protection equipment.
Describes harness styles, system applications, and how to determine available sizes.
Specifies the weight capacity requirements for the harness according to CSA and OSHA standards.
Defines harness purpose and compliance with national/regional standards.
Emphasizes training necessity and employer responsibility for a written rescue plan.
Covers system capacity limits and the need for suitable connecting subsystems.
Warns about environmental hazards and risks associated with extended suspension.
Provides guidelines and warnings for making secure and compatible connections between components.
Explains the proper use of lanyard parking attachments and what not to use them for.
Details planning steps and essential pre-installation checks before donning the harness.
Details the step-by-step procedure for putting on a vest-style harness.
Details the step-by-step procedure for putting on a crossover-style harness.
Outlines checks to verify the harness is properly installed and securely fitted by a second user.
Explains how to engage, disengage, and adjust quick connect buckles.
Explains how to engage, disengage, and adjust quick connect buckles.
Details how to tighten and loosen revolver adjusters for modifying shoulder straps.
Provides instructions for securing SRDs using straight-pin or carabiner interfaces.
Provides instructions for securing SRDs using straight-pin or carabiner interfaces.
Details the procedure for attaching the Weight Distribution System (WDS) to a compatible harness.
Explains how to deploy and use suspension trauma straps to alleviate trauma after a fall.
Describes securing lanyards with choker loops and connecting system components.
Details pre-use verification, work area assessment, and safe connection practices.
Specifies inspection intervals, procedures, and documentation requirements.
Provides instructions for cleaning, serviceability notes, and guidelines for storage and transport.
Illustrates product labels and their locations, detailing warnings and identification.
Covers the location, use for inspection recording, and proper disposal of the RFID Tag.
Provides definitions of essential terms used in the manual, with a link to a comprehensive glossary.
Outlines product warranty period, conditions, and 3M's repair or replacement remedy.
States 3M's exclusion from liability for indirect, incidental, special, or consequential damages.
