To Next PageTo Next Page
Need help?Do you have a question about the 3M DBI SALA LAD-SAF X3 and is the answer not in the manual?
General| Type | Cable Sleeve |
|---|---|
| Material | Stainless Steel |
| Color | Silver |
| Weight Capacity | 310 lb |
| Certification | ANSI A14.3 |
| Cable Diameter | 3/8 in (9.5 mm) |
| Standard | ANSI A14.3 |
Details the various labels and their meanings on the system.
Specifies the intended application of the Vertical System as part of fall protection.
Highlights critical warnings regarding misuse and potential severe injury or death.
Outlines risks and precautions specific to the system's use.
Details general risks and safety measures for working at height.
Defines the system's primary function in fall protection.
Mentions system compliance with national and regional standards.
Specifies requirements for supervision by competent personnel.
Emphasizes the necessity of proper training for users and installers.
Stresses the importance of having a rescue plan in place.
Details the required frequency for system inspections.
Outlines actions to take if the system is subjected to fall arrest forces.
Specifies requirements for structural anchorage points.
Lists potential environmental and operational hazards to consider.
Addresses compatibility issues with Climb Assist devices.
Stresses the use of only 3M approved components.
Details requirements for compatible connectors and their function.
Provides guidance on proper connection techniques and what to avoid.
Emphasizes planning considerations before system installation and use.
Step-by-step instructions for attaching the sleeve to the carrier cable.
Instructions for connecting the cable sleeve to the user's harness.
Details pre-use inspection and rescue plan verification steps.
Explains how to connect the system to a harness and safety limitations.
Specifies intervals and procedures for system inspections.
Outlines actions for defective components and system removal.
Discusses factors determining the product's functional lifespan.
Instructions for cleaning the carrier cable.
Procedure for cleaning the Lad-Saf X3 Vertical Cable Safety Sleeve.
Guidelines for proper storage and transport conditions.
Defines who can perform repairs and actions for defects.
Identifies the location of the RFID Tag on the product.
Provides guidance on product disposal and recycling requirements.
Details the limited warranty remedy for product defects.
States 3M's limitations on liability for damages.
