Do you have a question about the 3M DBI SALA EXOFIT Series and is the answer not in the manual?
Brand | 3M |
---|---|
Model | DBI SALA EXOFIT Series |
Category | Safety Equipment |
Language | English |
Describes the primary purpose and approved applications of the full body harness.
Illustrates and describes various applications for full body harnesses based on attachment elements.
Explains how to determine the correct harness size based on label reference.
Details the weight limits for the harness according to different standards like CE, CSA, ANSI, OSHA.
Explains the function of full body harnesses in fall protection systems and connection points.
Details compliance with national/regional standards and re-seller responsibilities.
Emphasizes the need for user training in correct application, care, and use of equipment.
Highlights the employer's responsibility to have a written rescue plan and trained personnel.
Defines system capacity limitations based on the lowest-rated component.
Stresses the importance of using suitable connecting subsystems for the application.
Advises on precautions needed when using equipment in hazardous environments.
Warns against extended suspension and recommends seat support to prevent trauma.
Stresses using 3M equipment with 3M equipment for safety and reliability.
Details requirements for connector compatibility to prevent inadvertent opening or disengagement.
Provides guidance on proper connection techniques to prevent roll-out and ensure secure attachments.
Explains the proper use of lanyard parking for safety and to prevent tripping hazards.
Emphasizes installing each component of the fall protection system per manufacturer instructions.
Advises accounting for all safety factors before, during, and after a fall.
Explains expected harness stretch during fall arrest and its impact on fall clearance.
Details the operation of Duo-Lok Quick Connect and Tongue Buckles for fastening.
Describes how to adjust shoulder straps using Revolver Torso Adjusters for a snug fit.
Provides step-by-step instructions for correctly donning and fitting the harness for a snug fit.
Explains how to attach Self-Retracting Devices (SRDs) using straight-pin or carabiner interfaces.
Details how to deploy and use suspension trauma straps to alleviate trauma after a fall.
Describes how to properly choke a lanyard onto a harness web loop for secure connection.
Instructs users to connect to their Fall Protection System following all requirements.
Details pre-use checks, rescue plan verification, and product inspection criteria.
Guidance on connecting components, preventing roll-out, and using appropriate connectors.
Specifies user/Competent Person inspection intervals, frequency factors, and procedures.
Defines actions for defective products and factors determining product functional life.
Provides instructions for cleaning the harness using mild detergent and air-drying.
States equipment cannot be repaired; must be rendered unusable before disposal.
Advises on storing and transporting the product in a cool, dry, clean environment.
Illustrates product labels, their locations, and the information they contain.
Details the location of the RFID tag and instructions for product disposal.
Provides definitions for key terms used throughout the user instructions.
Describes the dorsal attachment as the primary Fall Arrest point, also for Travel Restraint/Rescue.
Details sternal attachment use for alternative Fall Arrest, ladder climbing, Work Positioning, and Rescue.
Covers frontal, shoulder, and waist attachment uses, restrictions, and applications.
Describes hip and suspension seat attachment uses for Work Positioning only.
Outlines user and Competent Person inspection, maintenance, and storage requirements.
Covers defects in workmanship/materials for one year; excludes wear, abuse, misuse, and transit damage.
3M will repair or replace defective products; requires written notice and evaluation.
Limits 3M's liability for indirect, incidental, special, or consequential damages.