3M DBI SALA EXOFIT Series User Manual

5
;
Before using this equipment, record the product identication information from the ID label in the “Inspection and
Maintenance Log” at the back of this manual.
Table 1 - Product Specications
System Specications
Standards:
Each product model is certied to, or conforms with, the applicable standards and
regulations listed within Figure 1.
Component Specications
Figure 1
Category
Figure 1
Reference Description Materials
Attachment
Elements
1 Dorsal D-ring
Alloy steel - 22.2 kN (5,000 lbf) Tensile Strength
2 Sternal D-ring
Alloy steel - 22.2 kN (5,000 lbf) Tensile Strength
3 Hip D-rings
Alloy steel - 22.2 kN (5,000 lbf) Tensile Strength
Buckles and
Adjusters
4 Duo-Lok Quick Connect Buckles
Steel, stainless steel, and alloy steel - 18 kN (4,000 lbf) Tensile
Strength
5 Tongue Buckles
Steel and alloy steel - 18 kN (4,000 lbf) Tensile Strength
6 Revolver Adjusters
Aluminum alloy, stainless steel, alloy steel, and nylon - 18 kN
(4,000 lbf) Tensile Strength
Other Elements
7
Suspension Trauma Straps
Polyester webbing with polyester thread
8 Lanyard Keeper
Injection-molded nylon
9
SRD Adapter
Aluminum alloy
10
Gear Loop
11
Belt
Polyester
Pads
12
Hip Pad
Blend of nylon and polyester
13
Back and Shoulder Pad
Blend of nylon and polyester
Additional Materials
Description Materials
Webbing
Polyester - 27 kN (6,000 lbf) Tensile Strength
Stitching
Polyester thread on polyester webbing
Label Covers
Blend of nylon and polyester
Performance Specications
Maximum Free Fall Distance:
See the instruction manual of your connecting subsystem for more information on Maximum Free Fall
Distance requirements.
Maximum Arresting Force:
See the instruction manual of your connecting subsystem for more information on Maximum
Arresting Force requirements.
Maximum Harness Stretch:
1.5 ft. (0.45 m)

3M DBI SALA EXOFIT Series Specifications

General

Brand	3M
Model	DBI SALA EXOFIT Series
Category	Safety Equipment
Language	English