Need help?Do you have a question about the 3M DFS 700 and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Model | DFS 700 |
| Category | Safety Equipment |
| Language | English |
Details the components included in the DFS 700 standard model delivery package.
Lists and illustrates optional accessories available for the DFS 700.
Describes the purpose and application areas for the DFS 700 speed feedback system.
Explains the operational principles and features of the DFS 700.
Details the location and function of operating elements and electrical connectors on the DFS 700.
Outlines the various scenarios and configurations for using the DFS 700.
Describes the different operational modes available for the DFS 700.
Details optional accessories such as the Power Supply Unit Box and Battery.
Provides guidelines for safely transporting the DFS 700 and its accessories.
Specifies the recommended conditions for storing the DFS 700 and accessories.
Provides a simplified overview of the initial setup and commissioning process for the DFS 700.
Details the preliminary steps for preparing and mounting the standard DFS 700 model.
Describes preliminary work for integrating optional accessories with the DFS 700.
Explains how to configure the DFS 700 using the DFS-CAS PC software.
Provides instructions for installing the DFS-CAS software on a PC.
Guides the installation of the necessary USB driver for PC communication.
Details the process of connecting the DFS 700 to a PC using a USB cable.
Explains how to establish a Bluetooth connection between the DFS 700 and a PC.
Describes how to connect the DFS 700 to a PC using a GSM modem.
Details the setup of the DFS 700 using the DFS-CAS software interface.
Explains how to configure the DFS 700 using the DFS-CAS PDA software.
Provides instructions for installing the DFS-CAS software on a PDA.
Details establishing a Bluetooth connection between PDA and DFS 700.
Provides criteria for selecting an optimal installation site for the DFS 700.
Describes the procedures for physically mounting the DFS 700 unit.
Details the mounting process for the standard DFS 700 model on a pole.
Explains how to mount the DFS 700 using the Battery- & Mounting Box.
Details the options for providing and connecting electrical power to the DFS 700.
Describes how to operate the DFS 700 using mains power in its standard configuration.
Explains mains operation when the DFS 700 is integrated with the Battery- & Mounting Box.
Details how to operate the DFS 700 with battery backup and charger.
Provides instructions for operating the DFS 700 solely on battery power.
Explains how to provide power to the optional GSM/GPRS Modem.
Guides on how to transfer speed measurement data from the DFS 700 to a PC or PDA.
Explains how to assign downloaded speed data to specific locations for analysis.
Details how to view previously recorded speed measurements within the software.
Provides instructions for generating statistical reports from the collected speed data.
Provides instructions for cleaning the DFS 700 unit and its components.
Details routine maintenance checks and component replacement guidelines.
Lists common symptoms and their corresponding solutions for troubleshooting the DFS 700.
Explains how to check the diagnostic status and interpret status codes.
Provides information on updating the DFS 700 firmware.
Lists the overall specifications for the DFS 700 complete system.
To Next Page
