Need help?Do you have a question about the 3M SecureFit H-700 Series and is the answer not in the manual?
General| Type | Hard Hat |
|---|---|
| Material | High-density polyethylene (HDPE) |
| UV Indicator | No |
| Brand | 3M |
| Accessory Slots | Yes |
| ANSI/ISEA Compliance | ANSI/ISEA Z89.1-2014 |
| Product Series | H-700 Series |
| Standards Met | ANSI/ISEA Z89.1-2014 |
| Suspension Type | Ratchet |
| Recommended Application | Construction, General Industry |
| Ventilation | Available with or without vents |
Critical warnings about limited head protection, misuse consequences, and specific impact protection limitations.
Essential precautions for accessories, heat/sunlight exposure, and electrical protection standards for vented/non-vented models.
Instructions for maintaining the hard hat using mild soap and water, and proper storage away from heat and sunlight.
Guidelines for inspecting the hard hat shell and suspension for wear or damage, and recommended replacement intervals.
Step-by-step guide on how to correctly install the suspension into the hard hat shell for maximum protection.
Instructions for adjusting the headband size using either the ratchet or pinlock suspension mechanisms for a secure fit.
Procedure for adjusting the vertical position of the suspension for optimal head fit and comfort.
Guidance for hard hats marked with a reverse donning arrow, allowing wear frontward or backward.
To Next Page