EasyManua.ls Logo

3M DFS 700

3M DFS 700
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Information DFS 700 / 04.2009 5-1
5 Transport and Storage
5.1 Transport
For transporting the DFS 700, switched off and disconnected from the mains, and the
accessories the original packaging should always be used. If the DFS 700 and the Battery- &
Mounting Box are to be transported already assembled, a break-proof and weatherproof
packing should be made for this unit. In addition, the front of the frame is to be protected by a
soft cover.
For transport all outward-leading cables are to be laid such that they cannot hang loose.
The Battery must be removed from the Battery- & Mounting Box prior to transport and packed
separately.
Follow safety advices on handling the Battery, see Section 2.
During transport do not hit the parts or subject them to strong vibration.
5.2 Storage
The DFS and its accessories, switched off and disconnected from the mains, can be stored for
up to 12 months at an ambient temperature of 20°C to 30°C and 55% relative humidity in a
dry room.
Follow safety advices on storage of Batteries, see Section 2.

Table of Contents

Other manuals for 3M DFS 700

Related product manuals