3M DFS 700

Technical Information DFS 700 / 04.2009 6-25
6.5 Configuring the DFS 700 with a PDA
All the settings on the DFS 700 can also be made using the supplied PDA-program DFS-CAS.
Communication and data transfer between the PDA and the DFS 700 is wireless (Bluetooth).
Moreover, the PDA software can be used to diagnose faults in the DFS 700 and download
traffic data for the subsequent tranfer and analysis on the PC.
6.5.1 Install PDA program
PDA Requirements
• Windows Mobile 5.0 operating system
• Bluetooth
• Display-/Monitor resolution 240 x 230
• Microsoft .Net Compact Framework 2.0 SP1.
PC Requirements
• PC with Intel Pentium III
• CD-ROM drive
• Windows 2000 SP4 or
Windows XP SP2 operating system
• Internet Explorer 5.0
• Display-/Monitor resolution 1024 x 768
• Microsoft Active SynC 4.2 (or higher)
• 20 MB free disk space
• At least 256 MB RAM working memory.
Installation
(1) Insert the program CD in the CD-ROM drive – the Setup program then runs
automatically.
(2) Select “Install DFS-CAS for Windows Mobile“ or select “Start” then “Run” from the
Windows taskbar and enter the path to the CD ROM drive and the setup program file,
e.g. “d:\PDA\Setup.exe”
(3) Click “OK” to confirm. The program is installed, in doing so follow the installation
instructions.
(4) Once installation is complete the program can be started by using the new symbol on the
desktop or by selecting it via the “Programs” menu.