EasyManuals Logo

3M DBI SALA EXOFIT Series User Manual

3M DBI SALA EXOFIT Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
7.0 LABELS and MARKINGS
7.1 LABELS: Figure 16 illustrates product labels and their location on the harness. All labeling must be present and fully
legible. Information on each label is as follows:
A
1) Warning Statement - Read all user instructions. 2) Harness Specications
3) Warning Statement - Do not exceed system or harness capacity.
B
1) Harness Capacity: 130 lb. - 310 lb. 2) Model Number 3) Manufactured (Year/Month) 4) Lot Number
5) Harness Size 6) Applicable Standards 7) Letter Code Identier for Applicable Standards 8) User Identication
C
1) Attachment Element Diagram and Descriptions
2) Serial Number 3) Inspection Log
D 1) Made in USA with globally-sourced materials.
8.0 RFID Tag
8.1 LOCATION: 3M product covered in these user instructions is equipped with a Radio Frequency Identication (RFID) Tag.
RFID Tags may be used in coordination with an RFID Tag Scanner for recording product inspection results. See Figure 15
for where your RFID Tag is located.
8.2 DISPOSAL: Prior to disposing of this product, remove the RFID Tag and dispose/recycle in accordance with local
regulations. For more information, please visit our website: http://www.3M.com/FallProtection/RFID
9.0 GLOSSARY OF TERMS
9.1 DEFINITIONS: The following terms and denitions are used in these instructions.
;
For a comprehensive list of terms and denitions, please visit our website: www.3m.com/FallProtection/ifu-glossary
AUTHORIZED PERSON: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall
hazard.
COMPETENT PERSON: One who is capable of identifying existing and predictable hazards in the surroundings or working conditions
which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to
eliminate them.
FALL ARREST SYSTEM: A collection of Fall Protection equipment congured to protect the user in the event of a fall.
QUALIFIED PERSON: A person with a recognized degree, certicate, or professional standing, or who by extensive knowledge, training,
and experience has successfully demonstrated their ability to solve or resolve problems relating to Fall Protection and Rescue systems to
the extent required by applicable national, regional, and local regulations.
RESCUE SYSTEM: A collection of Fall Protection equipment congured to remove a person from hazards to a safe location. No free fall is
permitted.
RESCUER: A person using the Rescue system to perform an assisted rescue.
RESTRAINT SYSTEM: A collection of Fall Protection equipment congured to prevent the user from reaching a fall hazard. No free fall is
permitted.
USER: A person who performs activities while protected by a Fall Protection system.
WORK POSITIONING SYSTEM: A collection of Fall Protection equipment congured to support a user at a work position. Maximum
permissible free fall is 2 ft (61 cm).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3M DBI SALA EXOFIT Series and is the answer not in the manual?

3M DBI SALA EXOFIT Series Specifications

General IconGeneral
Brand3M
ModelDBI SALA EXOFIT Series
CategorySafety Equipment
LanguageEnglish

Related product manuals