3M DBI SALA EXOFIT X300 Series User Manual

6
;
Before using this equipment, record the product identication information from the ID label in the “Inspection and
Maintenance Log” at the back of this manual.
Table 1 - Product Specications
System Specications
Standards:
Each product model is certied to, or conforms with, the applicable standards and
regulations listed within Figure 1. If none are listed within Figure 1, then each one listed
on the cover applies.
D-ring Extension Length:
1.5 ft. (45.7 cm)
Component Specications
Figure 1
Category
Figure 1
Reference Description Materials
Attachment
Elements
1
Dorsal D-ring
Alloy steel and aluminum alloy - 22.2 kN (5,000 lbf) Tensile
Strength
2
Sternal D-ring Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength
3
Hip D-rings Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength
4
Shoulder D-rings Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength
5
Rear Waist D-ring Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength
6
D-ring Extension (Dorsal) Alloy steel and polyester - 22.2 kN (5,000 lbf) Tensile Strength
Buckles and
Adjusters
7
Quick Connect Buckles
Steel, stainless steel, and alloy steel - 18 kN (4,000 lbf) Tensile
Strength
8
Tongue Buckles Aluminum alloy - 18 kN (4,000 lbf) Tensile Strength
9
Pass-Through Buckles Alloy steel - 18 kN (4,000 lbf) Tensile Strength
10
Revolver Adjusters
Aluminum alloy, stainless steel, alloy steel, and nylon - 18 kN
(4,000 lbf) Tensile Strength
Other Elements
11
Suspension Trauma Straps Polyester webbing with polyester thread
12
Lanyard Keeper Injection-molded nylon
13
SRD Adapter Aluminum alloy
14
Seat Sling Blend of nylon and polyester
15
Gear Loop Polyester, nylon, PVC, and alloy steel
16
Weight Distribution System (WDS) Injection-molded nylon
17
Belt Polyester
Pads
18
Hip Pad Blend of nylon and polyester
19
Leg Pads
Blend of nylon and polyester
20
Back and Shoulder Pad Blend of nylon and polyester
Additional Materials
Description Materials
Webbing
Polyester - 27 kN (6,000 lbf) Tensile Strength
Stitching
Polyester thread on polyester webbing
Label Covers
Blend of nylon and polyester
Performance Specications
Maximum Free Fall Distance:
See the instruction manual of your connecting subsystem for more information on Maximum Free Fall
Distance requirements.
Maximum Arresting Force:
See the instruction manual of your connecting subsystem for more information on Maximum
Arresting Force requirements.
Maximum Harness Stretch:
1.5 ft. (45.7 cm)

3M DBI SALA EXOFIT X300 Series Specifications

General

Brand	3M
Model	DBI SALA EXOFIT X300 Series
Category	Safety Equipment
Language	English