3M FREEDOM 5000 - Figure 8 Installation of E-Pad, Gasplus Sensor and Endcap

27
087-0020 REV E
Figure 8 Installation of E-Pad, GasPlus Sensor and Endcap
Start – Up
Note
If “F08”
appears after power
has been
applied, the sensor
may not
be making electrical
contact
with the transmitter.
Retighten the sensor
end cap to ensure
electrical
continuity
4-20ma Loop
Connection
Elastomeric pad
P/N 093-0097
Gas Sensor
End cap– Conventional
P/N 074-0357
End cap – Rock Solid
P/N 074-0389
These are not used on
r
emote configurations
Sensor housing “O”-ring
P/N 009-0039
Test Points
TP1-Neg.
TP2-Pos
Freedom 5000 Universal Analog Toxic Gas Detector
Instruction Manual