16
Turning Off The Power
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
NOTE
1
Press the button of the projector or
the remote control.
The message “Power off?” will appear on the screen
for approximately 5 seconds.
2
Press the STANDBY/ON button again
while “Power off?” the message is
visible.
The projector lamp will go off, and the power
indicator will begin blinking orange.
Then the power indicator will stop blinking and light
to solid orange when the lamp cooling is complete.
3
Switch the power switch to [O] (OFF).
The power indicator will go off.
Power switch (OFF position)
Power ON/OFF (continued)
VIDEO
ASPECT
VOLUME
STANBY/ON
MAGNIFY
AUTO BLANK
RGB SEARCH
ON
(STANDBY/ON) button
Power switch
(on/off)button
power
indicator
01S10En03.9.245:07PMページ16
To Next Page
Loading...
Need help?
General
