03
Safety information
Read, understand and follow all safety information contained in these instructions
prior to use of the 3M
TM
Filtered Water Dispenser HCD-2.
Retain these instructions for future reference.
Intended Use:
The 3M
TM
Filtered Water Dispenser HCD-2 is intended for use in filtering potable water for
drinking
purposes. The system is typically installed at point of use, and must be installed by a
3M authorized professional installer according to installation instructions.
Explanation of Signal Word Consequences:
WARNING
NOTICE
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
About the Power Supply
To reduce the risks associated with hazardous voltage and fire:
●
Do not plug in multiple devices into the same power outlet or extension cord simultaneously.
●
Plug the power cord into a 220V outlet with at least a rating of 10 A and power surge protection.
●
Please ensure the power plug and power outlet is clean and dry.
●
Damaged parts or machine malfunction are only to be repaired or replaced by 3M authorized
professionals.
To reduce the risks associated with hazardous voltage:
●
Do not operate the machine with wet hands.
●
Do not bend the power cord excessively or put heavy objects over the power cord. Ensure your pets
do not damage the power cord.
●
Do not use the equipment if there is any damage to power cord, plug or the outlet.
Important guide during installation / Use
To reduce the risks associated with fire and explosion:
●
Do not place the equipment in area with potential gas leak, or near heating devices.
●
Do not put candles, lit cigarettes, or any heating devices on the unit.
Indicates a situation which, if not avoided, could result in property
damage.
WARNINGS
To Next Page
Loading...
