07
Display settings and functions
1. Water Full LED Indicator
•
Lights up when water tank is full. (Blue LED)
2. Cold Water LED Indicator
•
Lights up when “COLD” is set. (Blue LED)
3. Hot LED Indicator
•
Lights up when “HOT” is set.
•
Red LED : Tank Heating Mode ; Green LED : Instant Heating Mode
4. Hot (Stand-by) LED Indicator
•
Lights up when “HOT SELECTION” button is selected.(Red LED)
5. Hot Selection Button
•
To select hot water
•
Tap to select between heating modes (Tank Heating Mode, Instant Heating
Mode or to turn heating OFF)
6. Cold/Ambi. Selection Button with LED indicator
•
Tap to select cold or ambient water.
•
Green LED : Ambient water; Blue LED : Cold water
7. Water Dispensing Button
•
Tap to dispense water into containers or cups after selecting the desired type of
water temperature (hot, ambient or cold)
8. Drain Switch
•
I is on for Manual Drain setting. An alert sound will be triggered and water
source turned off.
•
O is off for Manual Drain. Water source will be on for normal operation.
To Next Page
Loading...
