27
Adjustments (Continued)
WARNING – Turn off electrical power and air supply and disconnect power cord from
electrical supply before beginning adjustments. If power cord is not disconnected, severe
injury to personnel could result.
Figure 5-3 – Box Drive Belt Tension Adjustment, Upper Belts (Infeed End)
Taping Head Adjustments – Refer to Section II
WARNING – Use care when working near tape cut-off knifes on taping heads as knifes are
extremely sharp. If care is not taken, severe injury to personnel could result.
TAPE WEB ALIGNMENT – Section II, Page 11
TAPE DRUM FRICTION BRAKE – Section II, Page 11
APPLYING MECHANISM SPRING – Section II, Page 12
ONE-WAY TENSION ROLLER – Section II, Page 12
TAPE LEG LENGTH ADJUSTMENT – Section II, Page 13
To Next Page
Loading...
